Buick Encore: Exterior Care
READ NEXT:
Washing the Vehicle
Locks
Locks are lubricated at the factory.
Use a de-icing agent only when
absolutely necessary, and have the
locks greased after using. See
Recommended Fluids and
Lubricants
Washing the Vehicle
To pr
Cleaning Exterior Lamps/
Lenses, Emblems, Decals, and
Stripes
Use only lukewarm or cold water, a
soft cloth, and a car washing soap
to clean exterior lamps, lenses,
emblems, decals, and stripes.
Follow instructions under "Washing
the Vehicle" previously in this
Brake System
Visually inspect brake lines and
hoses for proper hook-up, binding,
leaks, cracks, chafing, etc. Inspect
disc brake pads for wear and rotors
for surface condition. Inspect drum
brake linings/shoes for
SEE MORE:
Engine Heating and Cooling - Description and operation
Cooling fan description and operation (LUJ OR LUV)
The engine cooling fan system is composed of one cooling fan, a series of 5
relays, the engine control module
(ECM), and the associated wiring. The cooling fan assembly includes two
resistors. This combination of
components enables the ECM to oper
Repair instructions - on vehicle
Transmission fluid drain and fill
Draining Procedure
NOTE:
The fluid check bolt at the front of the transmission may not be
opened.
The transmission fluid drained out during the pre-delivery inspection
may
be re-used. New transmission fluid must be used during servicing work.
The transmiss
© 2020-2025 Copyright www.bencore2.com
