Buick Encore: Steering Wheel and Column
Buick Encore 2012-2019 Service Manual / Suspension & Steering / Steering Wheel and Column
READ NEXT:
Diagnostic information and procedures
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
SCHEMATIC WIRING DIAGRAMS
STEERING WHEEL WIRING SCHEMATICS (ENCORE)
Heated Steering Wheel
Fig. 1: Heated Steeri
Repair instructions
Intermediate steering shaft upper seal replacement
Fig. 6: Intermediate Steering Shaft Upper Seal
Intermediate Steering Shaft Upper Seal Replacement
INTERMEDIATE STEERING SHAFT REPLACEMENT (NJ1)
Description and operation
STEERING WHEEL AND COLUMN DESCRIPTION AND OPERATION
The steering wheel and column has 4 primary functions:
Vehicle steering
Vehicle security
Driver convenience
Driver safety
Vehicle Steering
The
SEE MORE:
Engine Heater
Vehicles may have an engine
heater. The engine heater can help
in cold weather conditions at or
below −18 ºC (0 ºF) for easier
starting and better fuel economy
during engine warm-up. Plug in the
heater at least four hours before
starting the vehicle. An internal
thermostat in the plug end of the
Lock cylinder coding - ignition
Fig. 14: Lock Cylinder Components - Ignition
The ignition lock cylinder uses 8 key cut positions, 1-8. The ignition
cylinder tumblers (3) are located on alternate sides of the cylinder (5). They
are not snap-in and are not self-retaining. It follows the key code with
the first tumbler being the
© 2020-2025 Copyright www.bencore2.com
