Buick Encore: Instrument Panel and Console Trim

 Radio programming and setup (UF7,UH7)

NOTE: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the ECU is not properly configured with the correct calibration software, the ECU will not control all of the vehicle features properly. Ensure the programming tool is equipped with the

 Vibration analysis - road testing (EL-38792-A ELECTRONIC VIBRATION ANALYZER)

Test Description The numbers below refer to the step numbers on the diagnostic table. 5 Obtaining rotational speed for the components rotating at tire/wheel speed is critical to systematically eliminating specific vehicle component groups. These component rotational speeds can be generated by usin