Buick Encore: Tire Pressure Monitoring
READ NEXT:
DTC C0569: System configuration malfunction
DIAGNOSTIC CODE INDEX
DIAGNOSTIC CODE INDEX
DTC C0569: SYSTEM CONFIGURATION MALFUNCTION
Diagnostic Instructions
Perform the Diagnostic System Check - Ve
Tire pressure indicator sensor replacement
Removal Procedure
Raise the vehicle on a suitable support. Refer to Lifting and Jacking
the Vehicle .
Remove the tire/wheel assembly from the vehicle. R
TIRE PRESSURE MONITOR DESCRIPTION AND OPERATION
Tire Pressure Monitoring Block Diagram
Fig. 4: Tire Pressure Monitoring System Wiring Schematic
Special Tools
EL-46079/J-46079 Tire Pressure Mon
SEE MORE:
INTRODUCTION
ARROWS AND SYMBOLS
This service manual uses various symbols in order to describe different
service operations.
Fig. 1: Identifying Different Service Operations Symbols
ACRONYMS AND UNITS
Acronyms
Units
CUSTOMER CONCERN VERIFICATION SHEETS
The GM Customer Concern Verific
Removal Procedure
Open hood.
Place a drain pan below the vehicle.
CAUTION: To prevent damage to oil filter cap ensure proper tool is
used. Do not
use an open end wrench which may cause damage to filter cap.
Using a 24mm socket or closed end wrench loosen oil filter cap. Unscrew
filter cap 3