Buick Encore: Drivline & Axle
READ NEXT:
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
DIAGNOSTIC INFORMATION AND PROCEDURES
SYMPTOMS - PROPELLER SHAFT
Before beginning diagnosis, review the system de
TWO-PIECE PROPELLER SHAFT REPLACEMENT
Removal Procedure
Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
.
Remove the muffler assembly. Refer to Exhaust Muffler Replacement
SEE MORE:
INTRODUCTION
ARROWS AND SYMBOLS
This service manual uses various symbols in order to describe different
service operations.
Fig. 1: Identifying Different Service Operations Symbols
ACRONYMS AND UNITS
Acronyms
Units
CUSTOMER CONCERN VERIFICATION SHEETS
The GM Customer Concern Verific
Turbocharger replacement - Removal Procedure
Special Tools
EN-49942 Holding Wrench
For equivalent regional tools, refer to Special Tools.
Removal Procedure
Disconnect battery negative cable. Refer to Battery Negative Cable
Disconnection and Connection .
Drain the cooling system. Refer to Coolin