Buick Encore Owners & Service Manuals

Buick Encore: Engine Coolant Temperature Gauge

Metric
Metric

English
English

This gauge shows the engine coolant temperature.

If the pointer moves toward the warning area at the high end of the gauge, the engine is too hot.

This reading indicates the same thing as the warning light. It means that the engine coolant has overheated. If the vehicle has been operating under normal driving conditions, pull off the road, stop the vehicle, and turn off the engine as soon as possible. See Engine Overheating

Seat Belt Reminders

Driver Seat Belt Reminder Light

There is a driver seat belt reminder light on the instrument cluster.

When the vehicle is started, this light flashes and a chime may come on to remind the driver to fasten their seat belt. Then the light stays on solid until the belt is buckled.

This cycle may continue several times if the driver remains or becomes unbuckled while the vehicle is moving.

If the driver seat belt is buckled, neither the light nor the chime comes on.

Passenger Seat Belt Reminder Light

The vehicle may also have a passenger seat belt reminder light.

light flashes and a chime may come on to remind passengers to fasten their seat belt. Then the light stays on solid until the belt is buckled.

This cycle continues several times if the front passenger remains or becomes unbuckled while the vehicle is moving.

If the front passenger seat belt is buckled, neither the chime nor the light comes on.

The front passenger seat belt reminder light and chime may turn on if an object is put on the seat such as a briefcase, handbag, grocery bag, laptop, or other electronic device. To turn off the reminder light and/or chime, remove the object from the seat or buckle the seat belt.

Airbag Readiness Light

This light shows if there is an electrical problem with the airbag system. The system check includes the airbag sensor(s), passenger sensing system (if equipped), the pretensioners, the airbag modules, the wiring, and the crash sensing and diagnostic module. For more information on the airbag system, see Airbag System

The airbag readiness light comes on for several seconds when the vehicle is started. If the light does not come on then, have it fixed immediately.

Warning

If the airbag readiness light stays on after the vehicle is started or comes on while driving, it means the airbag system might not be working properly. The airbags in the vehicle might not inflate in a crash, or they could even inflate without a crash. To help avoid injury, have the vehicle serviced right away.

    READ NEXT:

     Passenger Airbag Status Indicator

    The vehicle has a passenger sensing system. See Passenger Sensing System for important safety information. The instrument panel has a passenger airbag status indicator. United States Canada When th

     Malfunction Indicator Lamp

     Malfunction Indicator Lamp (Check Engine Light - Capless)

    This light is part of the vehicle's emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. T

    SEE MORE:

     Intake manifold replacement

    Intake manifold replacement - Removal Procedure Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection . Remove the engine cover. Refer to Engine Cover Replacement. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Fig.

     Change trans fluid message

    NOTE: To determine the appropriate reset procedure, refer to CHANGE TRANS FLUID MESSAGE RESET INDEX. Only the vehicles listed in this index have a CHANGE TRANS FLUID MESSAGE reset. CHANGE TRANS FLUID MESSAGE RESET INDEX CHANGE TRANS FLUID MESSAGE RESET - PROCEDURE 1 This message will appear on th

    © 2020-2024 Copyright www.bencore2.com