Buick Encore: Malfunction Indicator Lamp
Buick Encore 2020-2026 Owners Manual / Instruments and Controls / Warning Lights, Gauges, and Indicators / Malfunction Indicator Lamp
- Malfunction Indicator Lamp (Check Engine Light - Capless)
- Malfunction Indicator Lamp (Check Engine Light - Capped)
READ NEXT:
Malfunction Indicator Lamp (Check Engine Light - Capless)
This light is part of the vehicle's
emission control on-board
diagnostic system. If this light is on
while the engine is running, a
malfunction has been detected and
the vehicle may require service. T
Malfunction Indicator Lamp (Check Engine Light - Capped)
This light is part of the vehicle's
emission control on-board
diagnostic system. If this light is on
while the engine is running, a
malfunction has been detected and
the vehicle may require service. T
Brake System Warning Light
This light should come on briefly
when the vehicle is turned on. If it
does not come on then, have it fixed
so it will be ready to warn you if
there is a problem.
When the vehicle is on, the brake
SEE MORE:
Object alarm module programming and setup
NOTE:
DO NOT program a control module unless directed to by a service
procedure or a service bulletin. If the control module is not properly
configured with the correct calibration software, the control module will
not control all of the vehicle features properly.
Ensure the programming tool i
Vibration analysis - hub and/or axle input
Test Description
The numbers below refer to the step numbers on the diagnostic table:
2
This test will determine the effect of turning input on the vibration.
6
This test will determine the effect of an initial heavy torque load on the
vibration.
7
Damaged or worn wheel drive shafts may cause a noi
© 2020-2026 Copyright www.bencore2.com
