Buick Encore: Theft Deterrent
Schematic and routing diagrams
THEFT DETERRENT SYSTEM SCHEMATICS (ENCORE)
Theft Deterrent System

Fig. 1: Theft Deterrent System
THEFT DETERRENT SYSTEM SCHEMATICS (Encore)
Theft Deterrent System

Fig. 2: Theft Deterrent System
READ NEXT:
Symptoms - theft deterrent
NOTE: The following steps must be completed before using the
symptom tables.
Perform Diagnostic System Check - Vehicle in order to verify that all of
the following are
THEFT SYSTEMS DESCRIPTION AND OPERATION
When armed, the content theft deterrent system is designed to deter vehicle
content theft by pulsing the horns
and exterior lamps for approximately 30 seconds
Repair instructions
SPECIFICATIONS
FASTENER TIGHTENING SPECIFICATIONS
Fastener Tightening Specifications
REPAIR INSTRUCTIONS
FRONT BUMPER FASCIA ENERGY UPPER ABSORBER REPLACEMENT
Fig. 1: Front Bum
SEE MORE:
Use a microfiber cloth on high gloss
surfaces or vehicle displays. First,
use a soft bristle brush to remove
dirt that can scratch the surface.
Then gently clean by rubbing with a
microfiber cloth. Never use window
cleaners or solvents. Periodically
hand wash the microfiber cloth
separately, using
CAUTION: Do not remove the pigtail from either the heated oxygen sensor
(HO2S) or
the oxygen sensor (O2S). Removing the pigtail or the connector will affect
sensor operation.
Handle the oxygen sensor carefully. Do not drop the HO2S. Keep the inline
electrical connector and the louvered end free of