Buick Encore Owners & Service Manuals

Buick Encore: Display

Select and the following may be displayed:

  • Calibrate Touchscreen
  • Turn Display Off

Calibrate Touchscreen

Select to calibrate the touchscreen, then follow the prompts.

Turn Display Off

Select to turn the display off. Touch anywhere on the infotainment display or press any infotainment controls on the center stack to turn the display on.

Rear Camera

Select and the following may be displayed:

  • Guidance Lines
  • Rear Park Assist Symbols

Guidance Lines

Select to turn Off or On. See Rear Vision Camera (RVC)

Rear Park Assist Symbols

Select to turn Off or On.

Return to Factory Settings

Select and the following may be displayed:

  • Restore Vehicle Settings
  • Clear All Private Data
  • Restore Radio Settings

Restore Vehicle Settings

This allows selection of restoring vehicle settings.

Select Restore or Cancel.

Clear All Private Data

This allows selection to clear all private information from the vehicle.

Select Delete or Cancel.

Restore Radio Settings

This allows selection to restore radio settings.

Select Restore or Cancel.

Software Information

Select to view or update the infotainment system current software information.

Wi-Fi

Select and the following may display:

  • Wi-Fi
  • Manage Wi-Fi Networks

Wi-Fi

This feature allows Wi-Fi networks to be turned off or on.

Select Off or On.

Manage Wi-Fi Networks

Select to manage Wi-Fi networks.

Wi-Fi must be on for this feature to be accessed.

    READ NEXT:

     Universal Remote System

     Universal Remote System Programming

    See Radio Frequency Statement If equipped, these buttons are in the overhead console. This system can replace up to three remote control transmitters used to activate devices such as garage door op

     Universal Remote System Operation

    Using the Universal Remote System Press and hold the appropriate Universal Remote system button for at least one-half second. The indicator light will come on while the signal is being transmitted. Er

    SEE MORE:

     Description and operation

    Dual phase steel This information provides repair recommendations and general guidelines for steel classified as Dual Phase Steel (dual phase steel with a tensile strength up to and including 800 MPa), also known as DP. General Motors recommends the following when repairing or replacing this type

     Radio control programming and setup

    NOTE: DO NOT program a control module unless directed to by a service procedure or a service bulletin. If the ECU is not properly configured with the correct calibration software, the ECU will not control all of the vehicle features properly. Ensure the programming tool is equipped with the

    © 2020-2026 Copyright www.bencore2.com